TS-8 Home Mechanic Wheel Truing Stand
Designed especially for the home mechanic, the Park TS-8 allows accurate wheel truing at an economical price. Accepts wheels from 16” to 29”, with or without the tire mounted. Innovative sliding dropout allows quick wheel installation, no matter what the hub width (up to 170mm). Dishing (centering) is performed by simply flipping the wheel in the stand. Constructed from heavy gauge steel to resist flexing, the TS-8 can be used freestanding or bolted to a bench for extra stability.

TL-70-98 TS-8 home truing stand $74.88

Park Portable Wheel Dishing Gauge WAG-3
The WAG-3 accurately checks the dish, or offset, on all 26, 27 inch, and 700C wheels. Measurements are taken comparing one side of the wheel to the other to determine if the rim is in the center of the hub. Easily disassembles to fit into most tool boxes. Perfect for the race or home mechanic who wishes to quickly check wheel alignment. However for the most accurate readings of all sizes wheels, on or off the bike, use the WAG-4 Professional Wheel Alignment Gauge.

Park Spoke Tension Gauge
The key to wheels that are strong and reliable is having spokes that are properly and uniformly tensioned. The TM-1 Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. Easy to use and priced affordably, the TM-1 works on nearly any bicycle spoke-no matter what the diameter, material, or shape. Not just for the experienced mechanic, the TM-1 is for anyone building or truing wheels, diagnosing wheel problems, or assembling new bikes. The TM-1 includes a spoke gauge for measure the diameter of the common spokes, and a tension conversion table for 16 different spokes, including titanium and carbon. It's a tool that belongs on every workbench. NOTE: The TM-1 requires approximately 105mm (4 1/8-inch) of accessible spoke to read.

• To tighten or loosen Campagnolo's current 5 mm nipples that are used on their black rims, we suggest ordering the Wiha 5 mm, long shaft, screw driver handle nut driver.
  For pre-1999 Campagnolo spokes which are used on their silver rims, we suggest using the 5.5 mm Wiha nut driver.
  Mavic, HED, Rolf and many other factory wheels use a 3/16 of an inch nut driver.

Park Spoke Ruler, Bearing, and Cotter Gauge

This exceptionally handy tool is ideal for sizing spokes, ball bearings and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings it works just like a gauge for drill bits. Spoke lengths are in both metric and fractional inch markings. Made of anodized aluminum with embossed markings to allow easy reading and long life.

At Branford Bike we want you to be happy and satisfied with everything you purchase from us. We understand that sometimes you will need to return a product because it was not quite what you wanted. You may return anything you purchase from us within 60 days and unused, for an immediate exchange or refund.

Shopping online at Branford Bike is secure, easy and fun.
Start by filling in the quantity you would like and then click on the Add To Cart button. We will record the merchandise you select and display a list for you on the shopping cart page.

You may continue shopping or push the Place Order button to send your completed order to us. We will verify your order, and then e-mail you a confirmation. Most orders ship within one to three business day.

If you do NOT click on the PLACE ORDER button we will NOT receive your order.